TP-Link TL-SG108PE: A Smart Switch for Small PoE Networks
TP-Link TL-SG108PE: A Network Booster
If you are looking for a simple and affordable way to power and manage your PoE devices, such as IP cameras, access points, or VoIP phones, you might want to consider the TP-Link TL-SG108PE. This is an 8-port Gigabit switch that supports 4 PoE+ ports with a total power budget of 64W. It also has some smart features that let you configure VLANs, QoS, link aggregation, and more. In this article, I will review the TP-Link TL-SG108PE and answer some common questions about it.
Is TL-SG108PE a managed switch?
The TL-SG108PE is not a fully managed switch, but rather an easy smart switch. This means that it has some basic management features that can be accessed through a Windows utility or a web-based interface. You can also monitor the status and statistics of the switch and its ports. However, it does not support advanced features such as SNMP, RMON, ACLs, or STP.
How fast is TP-Link TL-SG108?
The TP-Link TL-SG108 is a Gigabit switch, which means that it can deliver up to 1000 Mbps of data transfer speed per port. It has a switching capacity of 16 Gbps and a forwarding rate of 11.9 Mpps. It also supports jumbo frames up to 16 KB, which can improve the performance of large data transfers.
Is the TL-SG108 PoE compatible?
The TL-SG108 has two versions: the TL-SG108E and the TL-SG108PE. The TL-SG108E does not support PoE, while the TL-SG108PE supports PoE+ on 4 of its 8 ports. PoE+ means that it can deliver up to 30W of power per port, which is enough for most PoE devices. The total power budget of the switch is 64W, which means that you can power up to four 15W devices or two 30W devices at the same time.
What is the default password for TP-Link TL-SG108PE?
The default password for accessing the web-based interface of the TP-Link TL-SG108PE is admin/admin. You can change it after logging in for security reasons. You can also enable HTTPS for secure access.
What is the difference between managed and unmanaged switch TP-Link?
A managed switch is a switch that can be configured and monitored remotely through various protocols and interfaces. It usually has more features and functions than an unmanaged switch, such as VLANs, QoS, security, routing, etc. An unmanaged switch is a plug-and-play device that does not require any configuration or management. It simply forwards packets based on MAC addresses.
The TP-Link TL-SG108PE is neither a managed nor an unmanaged switch, but an easy smart switch. It has some basic management features that can be accessed through a Windows utility or a web-based interface, but not as many as a managed switch.
How can I make my TP-Link faster?
There are several factors that can affect the speed of your TP-Link switch, such as the cable quality, the network traffic, the device compatibility, etc. Here are some tips to optimize your TP-Link switch performance:
- Use high-quality Cat5e or Cat6 cables to connect your devices to the switch.
- Enable link aggregation if you have multiple devices that need high bandwidth.
- Configure VLANs to isolate different network segments and reduce broadcast traffic.
- Enable QoS to prioritize important or time-sensitive traffic.
- Disable storm control or port rate limiting if they are causing packet drops or delays.
- Update the firmware of your switch to fix any bugs or issues.
What is the difference between TP Link PoE and PoE+?
PoE stands for Power over Ethernet, which is a technology that allows data and power to be transmitted over a single Ethernet cable. PoE+ is an enhanced version of PoE that supports higher power output and more efficient power management.
The main difference between TP Link PoE and PoE+ is the amount of power they can deliver per port. TP Link PoE can deliver up to 15.4W of power per port, while TP Link PoE+ can deliver up to 30W of power per port. This means that TP Link PoE+ can power more devices or devices that require more power, such as PTZ cameras or wireless access points.
Another difference between TP Link PoE and PoE+ is the standard they follow. TP Link PoE follows the IEEE 802.3af standard, while TP Link PoE+ follows the IEEE 802.3at standard. The IEEE 802.3at standard has some improvements over the IEEE 802.3af standard, such as better power negotiation, detection, and classification.
Conclusion
The TP-Link TL-SG108PE is a good choice for small PoE networks that need simple and affordable management. It offers 8 Gigabit ports, 4 of which support PoE+, with a total power budget of 64W. It also has some smart features that let you configure VLANs, QoS, link aggregation, and more. It is easy to set up and use, and has a sturdy metal design and a fanless operation. If you are looking for a smart switch for your PoE devices, you might want to check out the TP-Link TL-SG108PE.